Machining 4.0

Lights-out, done-in-one turn-mill parts in hard alloys. Every part CMM-inspected.

Hard Metal. Tight Tolerance. Single Operation.

We specialize in hard-to-machine alloys other shops no-quote — corrosion-resistant, high-strength, and exotic materials held to aerospace tolerances.

  • 17-4 PH and 15-5 PH precipitation-hardening stainless

  • 300-series stainless

  • Nitronic 50 HS

  • Super Duplex 2507

  • C72900 Toughmet 3

100% CMM inspection, fully digital records

Every part is measured on CMM and documented digitally — no paper, no guesswork. First articles, process charts, and SPC live in Net-Inspect, so the data is there before you ask for it.

  • AS9100D certified

  • AS9102 First Article Inspection

  • AS9103 Key Characteristics tracking

  • Full digital traceability via Net-Inspect™

Fully Robotic Process

Part Loading

Robotic load/unload keeps the spindle cutting around the clock.

Machining

Turned and milled complete in one setup. No second ops.

Part Cleaning

Automated wash removes chips and coolant before CMM.

CMM Measuring

Every part measured, not sampled, for full confidence.

Upload to Net-Inspect

Inspection data posted for full part traceability.

Our Capabilities

Three DMG MORI NTX 1000 turn-mill centers with IMTR, running lights-out

  • Tolerances held to ±0.0002″

  • Turning up to Ø10.0″ diameter and 31.0″ long

  • Milled features up to 9.0″ long

  • Done-in-one turning and B-axis milling, no second ops

  • 23 hours of spindle time per day

  • 100% CMM inspection, results in Net-Inspect

Our Process

Send us a CAD file

Send or upload a 3D model (STEP preferred) and a drawing with tolerances.


DFM Analysis

Within a few hours you get DFM feedback, a simulation of the machining process and a quote.


Manufacturing Begins

Approve the quote and send your PO to [email protected]


Parts are shipped

Parts ship with inspection data in Net-Inspect, in as little as one day.